Unlock New Levels of Comfort: Step-by-Step Guide to Replacing Bose QuietComfort 35 II Ear Pads

Are your Bose QuietComfort 35 II headphones starting to show their age? One of the most common issues with headphones is worn-out ear pads. Not only can this affect the comfort of your listening experience, but it can also impact the sound quality. Fortunately, replacing the ear pads on your Bose QuietComfort 35 II headphones is a relatively easy task that can be completed in a few simple steps.

Materials You’ll Need

• New Bose QuietComfort 35 II ear pads
• Small screwdriver (Phillips #00)
• Tweezers (optional)

Step-by-Step Instructions

1. Remove the Old Ear Pads

• Gently lift the edge of the old ear pad with your fingernail or a small screwdriver.
• Once you have a small opening, insert the screwdriver and pry the ear pad away from the headphone.
• Work your way around the edge of the ear pad, gently prying it off.

2. Clean the Headphone Housing

• Once the old ear pad is removed, use a soft cloth to clean any debris or glue residue from the headphone housing.
• This will ensure a good bond between the new ear pad and the headphone.

3. Align the New Ear Pad

• Take the new ear pad and align it with the headphone housing.
• Make sure that the tabs on the ear pad fit into the corresponding slots on the headphone.

4. Press the Ear Pad into Place

• Gently press the ear pad into place, starting from the center and working your way outwards.
• Use your fingers or a small screwdriver to apply even pressure around the edge of the ear pad.

5. Screw in the Ear Pad

• Once the ear pad is fully seated, use the small screwdriver to screw in the screws that secure it to the headphone housing.
• Tighten the screws until they are snug, but do not overtighten.

6. Repeat for the Other Ear Pad

• Repeat steps 1-5 for the other ear pad.

7. Enjoy Your Refreshed Headphones

• Once both ear pads are replaced, put on your headphones and enjoy the renewed comfort and sound quality.

Tips

• If you find it difficult to remove the old ear pads, you can use a pair of tweezers to gently grip the edge and pull it away from the headphone.
• Be careful not to damage the headphone housing when prying off the old ear pads.
• If you lose one of the screws, you can purchase a replacement screw from Bose or a hardware store.
• Replace your ear pads every 1-2 years to maintain optimal comfort and sound quality.

Troubleshooting

Why is one ear pad looser than the other?

• Make sure that both ear pads are properly aligned and seated correctly.
• Check that the screws are tightened evenly on both sides.

My headphones sound different after replacing the ear pads.

• Make sure that the new ear pads are properly seated and that there are no gaps between the ear pads and the headphone housing.
• The new ear pads may take some time to break in and conform to the shape of your ears.

Wrapping Up

Replacing the ear pads on your Bose QuietComfort 35 II headphones is a simple and straightforward process that can be completed in a matter of minutes. By following these instructions carefully, you can restore your headphones to their former glory and enjoy years of continued listening pleasure.

Quick Answers to Your FAQs

How often should I replace my Bose QuietComfort 35 II ear pads?

Every 1-2 years, depending on usage and wear.

Can I use any type of ear pads with my Bose QuietComfort 35 II headphones?

No, you should only use ear pads specifically designed for the Bose QuietComfort 35 II headphones.

Where can I purchase replacement ear pads for my Bose QuietComfort 35 II headphones?

You can purchase replacement ear pads from Bose or from authorized retailers.