Eradicate Ear Pad Woes: A Step-by-Step Guide to Removing Smith Vantage Ear Pads
What To Know
- If your ear pads have a wire that connects them to the helmet, disconnect the wire before removing the ear pads completely.
- If you are replacing the ear pads, make sure to use ear pads that are compatible with your Smith Vantage helmet.
- If you damaged the ear pads, you can purchase new ear pads from Smith or a third-party retailer.
Removing ear pads from Smith Vantage helmets is a simple process that can be completed in a few minutes. By following the steps outlined in this guide, you can easily remove your ear pads for cleaning, replacement, or storage.
Materials You’ll Need
- Smith Vantage helmet
- Phillips head screwdriver (optional)
- Flathead screwdriver (optional)
Step-by-Step Instructions
1. Locate the Ear Pad Screws
On each side of the helmet, there are two screws that secure the ear pads. These screws are typically located near the top and bottom of the ear pad.
2. Remove the Top Screw
Using a Phillips head screwdriver, remove the top screw on each side of the helmet.
3. Loosen the Bottom Screw (Optional)
In some cases, the bottom screw may be difficult to remove. If this is the case, use a flathead screwdriver to loosen the screw slightly.
4. Lift the Ear Pad
Once the screws are removed, gently lift the ear pad up and away from the helmet. Be careful not to pull too hard, as you may damage the ear pad or the helmet.
5. Disconnect the Ear Pad Wire (Optional)
If your ear pads have a wire that connects them to the helmet, disconnect the wire before removing the ear pads completely.
6. Remove the Bottom Screw
Now that the ear pad is lifted, you can remove the bottom screw.
7. Remove the Ear Pad
Once the bottom screw is removed, the ear pad can be removed completely.
Tips
- If you are having difficulty removing the screws, try using a larger screwdriver or applying more pressure.
- Be careful not to overtighten the screws when reattaching the ear pads.
- If you are replacing the ear pads, make sure to use ear pads that are compatible with your Smith Vantage helmet.
Troubleshooting
Problem: I can’t remove the ear pads.
Solution: Make sure that you are using the correct screwdriver and that you are applying enough pressure. If you are still having difficulty, try using a larger screwdriver or contacting Smith customer service.
Problem: I damaged the ear pads when I removed them.
Solution: If you damaged the ear pads, you can purchase new ear pads from Smith or a third-party retailer.
Frequently Asked Questions
Q: How often should I remove my ear pads for cleaning?
A: It is recommended to remove your ear pads for cleaning every few months, or more often if you ride in dusty or muddy conditions.
Q: Can I wash my ear pads in the washing machine?
A: No, you should not wash your ear pads in the washing machine. This can damage the ear pads and the helmet.
Q: Where can I find replacement ear pads for my Smith Vantage helmet?
A: You can purchase replacement ear pads from Smith or a third-party retailer.