What To Know
- Your Bose NC700 headphones are a testament to exceptional sound quality and noise cancellation, but over time, the ear pads may start to show signs of wear.
- Use tweezers or needle-nose pliers to gently lift and remove the old ear pad attachment ring from the driver unit.
- Take the new ear pad attachment ring and align it with the grooves on the driver unit.
Your Bose NC700 headphones are a testament to exceptional sound quality and noise cancellation, but over time, the ear pads may start to show signs of wear. Replacing them is crucial to maintain optimal audio performance and comfort. This comprehensive guide will walk you through the step-by-step process of replacing your Bose NC700 ear pads, ensuring your headphones continue to deliver an immersive and enjoyable listening experience.
Materials You’ll Need
Before you begin, gather the following materials:
- New Bose NC700 ear pads
- Small Phillips head screwdriver
- Tweezers or needle-nose pliers (optional)
Step 1: Remove the Old Ear Pads
- Gently pull one ear pad away from the earcup, starting from the bottom edge.
- Carefully detach the ear pad by pulling it straight out from the earcup.
- Repeat the process for the other ear pad.
Step 2: Prepare the Earcups
- Use a small Phillips head screwdriver to remove the two screws on the inside of each earcup.
- Carefully lift the plastic cover off the earcup, revealing the driver unit.
Step 3: Detach the Driver Unit
- Gently push the driver unit inward to detach it from the earcup.
- Be careful not to damage the wires connected to the driver unit.
Step 4: Remove the Old Ear Pad Attachment Ring
- Use tweezers or needle-nose pliers to gently lift and remove the old ear pad attachment ring from the driver unit.
- Dispose of the old ear pad attachment ring.
Step 5: Install the New Ear Pad Attachment Ring
- Take the new ear pad attachment ring and align it with the grooves on the driver unit.
- Gently push down on the ring until it snaps into place.
Step 6: Reattach the Driver Unit
- Carefully align the driver unit with the earcup and gently push it back into place.
- Secure the driver unit by tightening the two Phillips head screws.
Step 7: Install the New Ear Pads
- Align the new ear pad with the earcup and gently push it into place.
- Make sure the ear pad is securely attached by pressing around its edges.
- Repeat the process for the other ear pad.
Tips for Optimal Results
- Use genuine Bose NC700 ear pads to ensure compatibility and optimal performance.
- Be gentle when detaching and attaching the ear pads to avoid damaging the headphones.
- If you encounter any difficulties, consult the Bose website or contact customer support.
Final Note: Extend the Life and Enjoyment of Your Bose NC700 Headphones
Replacing the ear pads on your Bose NC700 headphones is a straightforward process that can significantly enhance your listening experience. By following the steps outlined in this guide, you can ensure your headphones continue to provide years of exceptional audio quality and comfort.
Quick Answers to Your FAQs
Q: How often should I replace my Bose NC700 ear pads?
A: The frequency of ear pad replacement depends on usage and care. Generally, it’s recommended to replace them every 1-2 years.
Q: Can I use third-party ear pads?
A: While third-party ear pads may fit physically, they may not be optimized for the specific acoustics of the Bose NC700 headphones. Using genuine Bose ear pads is recommended for optimal performance.
Q: Is it possible to clean the ear pads instead of replacing them?
A: Yes, you can gently clean the ear pads using a soft cloth and a mild detergent solution. However, if they are heavily soiled or worn, it’s best to replace them.
